Wireless Setup; Learn Remote - Martin Logan CADENCE Mode D'emploi

MENU OPTION: WIRELESS SETUP
Wireless Setup: Enter the submenu by pressing
the enter button. Here you may setup a Wi-Fi and
Bluetooth connection.
Wireless Setup > Initialize WiFi: Enter the
submenu by pressing the enter button.
Wi-Fi Setup > Initialize Wifi > No: Activate
by pressing the enter button. Choosing this option
will exit without resetting and initializing the Wi-Fi
settings.
Wi-Fi Setup > Initialize WiFi >Yes: Activate
by pressing the enter button. The soundbar will
respond with 'Resetting' and will power off and
back on. When the soundbar powers on it will
automatically enter Access Point Setup mode.
Please see "DTS Play-Fi and Network Section >
Connection to a wireless network: Access Point
Setup" section of this manual for more information.
After a reset there is no way to recover previous
network settings.
Wireless Setup > Bluetooth Pairing:
Activate by pressing the enter button. The soundbar
will respond with 'Pairing Mode On'. The sound-
bar will remain in pairing mode for 5 minutes. Use
your source device's Bluetooth setup menu to setup
a Bluetooth connection.
MENU OPTION: LEARN REMOTE
Please note: There may be remotes that the soundbar
cannot learn or that the soundbar can not learn cor-
rectly. Due to the number of available remotes, it is
impossible to advise which remotes will or will not work.
Please note: When learning from a second remote,
you will likely find it does not have buttons that directly
correspond with all available soundbar commands.
28
Not all commands have to be programmed. Some
remotes offer 'function' buttons (F1, F2, etc.) that can
be used to program unique soundbar commands such
as 'Bass Mode: Night' or 'Input: HDMI 1'.
Please note: Some remote controls offer discrete
'power on' and 'power off' buttons. Some offer
a single button to toggle power on and off. The
learning function of the soundbar allows you to
program either scenario.
Learn Remote: Enter the submenu by pressing the
enter button. The settings in this menu program the
soundbar to respond to a second remote control. The
factory supplied remote control will always work with
the soundbar, even if the soundbar is programmed
to respond to a second remote. If you attempt to pro-
gram a remote code from a second that is already
programmed the soundbar will respond with "Failed".
Using the up/down directional buttons, you can
select and program the following commands:
• Volume +
• Volume –
• Mute
• Next Input
• Previous Input
• Up
• Down
• Left
• Right
• Enter
• Bass Mode: Night
• Bass Mode: Normal
• Bass Mode: Bass+
• Stereo Mode: Wide
• Stereo Mode: Voice+
• Stereo Mode: Normal
• Power Toggle
• Power On
• Power Off
• Menu
• Input: HDMI 1