Connection; Power Connection - Martin Logan CADENCE Mode D'emploi

Fig. 3
c
onnectIon
WARNING! Turn your soundbar
off before making or breaking any
signal connections! WARNING!
The power cord should not be
installed, removed, or left detached from the
soundbar while the other end is connected to
an AC power source.

POWER CONNECTION

The power cord should be firmly inserted into
the AC power receptacle on the rear connection
panel of the soundbar, then to any convenient AC
wall outlet. The soundbar also integrates a signal
sensing power supply that automatically switches
into standby mode after sensing no audio signal
for approximately 20 minutes (this will only occur
when the menu's power setting is set to 'Auto
Standby').
M6
7mm
Fig. 4
3.2
2mm
13.7mm
11