Digital Inputs (Hdmi And Optical); Analog Input - Martin Logan CADENCE Mode D'emploi

sion for the mac address of the soundbar's MCU.
Service > Firmware > MAC LAN: Pressing
the enter button will display the current firmware ver-
sion for the mac address of the soundbar's LAN.
Service > Firmware > MAC Wi-Fi: Pressing
the enter button will display the current firmware ver-
sion for the mac address of the soundbar's Wi-Fi.
Service > Firmware > CAP INFO: Pressing
the enter button will display the current infomation
for the soundbar's Play-Fi module.
Service > Factory Reset: Enter the submenu
by pressing the enter button. Resetting the sound-
bar will restore all settings to the factory defaults
settings. This will erase all user-configured presets,
Anthem Room Correction data, and Wi-Fi settings.
This function requires confirmation to reduce risk of
performing an accidental reset.
Service > Factory Reset > At Home: Enter
the submenu by pressing the enter button.
s s
urround ound

DIGITAL INPUTS (HDMI AND OPTICAL)

This soundbar is capable of detecting and auto-
matically decoding multi-channel audio formats,
such as those found on DVD and Blu-ray movies.
When utilizing a digital connection, the soundbar
can process the following formats: Dolby
DTS Digital Surround™, and digital stereo.
30
d
ecodIng
Digital,
®
Service > Factory Reset > At Home > No:
Activate by pressing the enter button. Choosing this
option will exit without performing a reset.
Service > Factory Reset > At Home >
Yes: Activate by pressing the enter button. The
soundbar will respond with 'Resetting'. Once com-
plete, your soundbar will be reset to factory default
Home settings. After a reset has been performed,
there is no way to recover the previous settings.
Service > Factory Reset > In Store Enter
the submenu by pressing the enter button.
Service > Factory Reset > In Store > No:
Activate by pressing the enter button. Choosing
this option will exit without performing a reset.
Service > Factory Reset > In Store > Yes:
Activate by pressing the enter button. The soundbar
will respond with 'Resetting'. Once complete, your
soundbar will be reset to factory default Home set-
tings. After a reset has been performed, there is no
way to recover the previous settings.

ANALOG INPUT

Digitally encoded sound information cannot be
transmitted to an analog input. This connection
method is adequate for most devices that only
offer two channels of output (such as VCRs, CD
players, older game consoles, or portable media
player docks). Although most surround sound
capable devices, such as DVD and Blu-ray play-
ers, offer both analog and digital connections, the
digital connection should always be employed. If
a source device is connected via an analog left/
right RCA connection, the 5.1-channel encoded
audio content will not be sent to the soundbar.