Stereo; Install; Display - Martin Logan Motion Vision Guide De L'utilisateur

encoded content) to fully reproduce all 5.1-channels
of information including simulated surround channels.
Activate by pressing the right directional button and
the soundbar will respond with 'SET'.
SURRND > OFF: [SURROUND OFF] This option
configures the soundbar (when it detects 5.1-chan-
nel encoded content) to down-mix to 3.1-channel
output (left/center/right channels + subwoofer)
and does not utilize simulated surround channels.
All content originally intended for the surround
channels is routed to the left/center/right chan-
nels. Activate by pressing the right directional
button and the soundbar will respond with 'SET'.
MENU OPTION: STEREO
STEREO: [STEREO] Enter the 'STEREO' submenu
by pressing the right directional button. Here you
may set how the soundbar reproduces audio from
2-channel (stereo) sources.
STEREO > VOICE+: [VOICE PLUS] This option con-
figures the soundbar (when it detects 2-channel content)
to reproduce the left and right channels with a simulated
center channel. Activate by pressing the right directional
button and the soundbar will respond with 'SET'.
STEREO > PL II: [DOLBY PRO LOGIC II] This option
configures the soundbar (when it detects 2-channel
content with PLII encoding) to simulate multi-channel
surround. Activate by pressing the right directional but-
ton and the soundbar will respond with 'SET'.
STEREO > NORMAL: This option configures
the soundbar (when it detects 2-channel content) to
reproduce the content using only the left and right
channels and does not alter the original signal.
Activate by pressing the right directional button
and the soundbar will respond with 'SET'.
20
MENU OPTION: INSTALL
INSTAL: [INSTALL] Enter the 'INSTAL' submenu
by pressing the right directional button. The settings
in this menu will adjust the soundbar's equalization
and voicing for optimal performance in on-wall or
shelf top installations.
INSTAL > ON.SHLF: [ON SHELF] This option
configures the soundbar's audio output to sound
best in shelf top installations. Activate by pressing
the right directional button and the soundbar will
respond with 'SET'.
INSTAL > ON.WALL: [ON WALL] This option
configures the soundbar's audio output to sound
best in on-wall installations. Activate by pressing
the right directional button and the soundbar will
respond with 'SET'.
MENU OPTION: DISPLAY
DISPLY: [DISPLAY] Enter the 'DISPLY' submenu by
pressing the right directional button. The settings in
this menu allow you to adjust the brightness of the
soundbar's display, as well as configure the dis-
play to automatically turn itself on and off.
DISPLY > BRIGHT: This option configures the
soundbar's display to be on at full brightness when
the soundbar is on. Activate by pressing the right
directional button and the soundbar will respond
with 'SET'.
DISPLY > DIM: This option configures the sound-
bar's display to be on at a reduced brightness
when the soundbar is on. Activate by pressing
the right directional button and the soundbar will
respond with 'SET'.
DISPLY > AUTO.BR: [AUTO BRIGHT] This
option configures the soundbar's display to be on