Dts Play-Fi And Network Connection; Network Requirements; Dts Play-Fi App Requirements; Wi-Fi Status Led - Martin Logan CADENCE Mode D'emploi

dts P ‑f
lay I

NETWORK REQUIREMENTS

You must have the following to connect your soundbar
to your network:
• A wireless router.
• A high-speed internet connection for reliable
playback of internet based music services.
• Have your network password ready before
connecting the soundbar to your network.
TIP! If wireless connectivity is weak or not available,
connect to your router with an Ethernet cable.
TIP! Your soundbar communicates with wireless networks
that support 802.11g/n. For best performance, a
network that supports 802.11n wireless technology
is recommended. A network supporting 802.11b
may be used, but it will effectively stream to only one
device equipped with DTS Play-Fi
communicates over a 2.4 GHz wireless band, however,
it can become slow in locations, such as apartments,
where many routers are in operation. Consequently,
your soundbar is capable of jumping onto a 5 GHz
band on dual band wireless routers.
DTS PLAY-FI APP REQUIREMENTS
®
• An Android device running Android 2.2 or later.
• An iOS device running iOS 6.0 or later.
• A Windows PC running Windows 7, 8 (32
®
and 64 bit), or later.
Fig. 13
access point setup: press 8 seconds

[Wi-Fi Status LED]

n
®
and etwork
. Your soundbar
®
[Wi-Fi Setup:
WPS setup: press 3 seconds
]
c
onnectIon
Wi-Fi STATUS LED
The Wi-Fi Status LED tells you what your soundbar
is doing.
• Rapid Blinking: booting up.
• Blinking: connecting to a wireless router.
• Slow Pulse: Access Point Setup Mode.
• Two Blinks: WPS (Wi-Fi Protected Setup) Mode.
• Solid: wirelessly connected to a router.
• Off: connected to a router using an Ethernet
connection.

DOWNLOADING THE DTS PLAY-FI APP

Android Device Users: Download the free DTS Play-Fi
app from Google Play or the Amazon App Store.
iOS Device Users: Download the free DTS Play-Fi
app from the Apple App Store.
PC Users: Download and install the free DTS Play-Fi
program from https://play-fi.com/apps/windows

CONNECTING TO A WIRELESS NETWORK:

ACCESS POINT SETUP
Access Point Setup causes your soundbar to behave
as if it were a wireless router. Using your mobile
device or Wi-Fi capable PC, you connect directly
to your soundbar using Wi-Fi, select your home
wireless network, and enter the network password.
1. For optimal setup conditions place your soundbar
next to your wireless router. The soundbar can
be moved to its final location after Wi-Fi setup.
2. Plug in your soundbar and press the Power button.
3. The Wi-Fi Status LED will start rapidly blinking for
20 seconds while your soundbar boots. If this is
the first time your new soundbar is plugged in,
31