Volume Behavior By Input - Martin Logan CADENCE Mode D'emploi

a I
n ntroductIon
Ethernet: This cable allows you to physically connect a device to a LAN (local area
network). When connected to a LAN, audio information can be sent to this
Wi-Fi: This connection technology wirelessly connects a device to a LAN (local area
network). When connected to a LAN, audio information can be sent to this speaker using
various protocols (such as Play-Fi or AirPlay). If an Ethernet connection is used to connect
to a LAN, there is no need to use a Wi-Fi connection. In some installations a 'hard-wired' Ethernet
connection may prove more desirable than a wireless connection.
Bluetooth: This wireless connection technology allows a wide variety of devices to connect
to an audio output device and stream audio. Bluetooth establishes a connection directly
with an audio output device and does not require either device to be connected to a LAN.
v B
olume ehavIor By
Depending on the input selected on your speaker, the volume will exhibit different behaviors .
SPEAKER INPUT
Wireless or Ethernet
(using AirPlay or Play-Fi)
HDMI, Digital Optical, Analog
Bluetooth
* Devices connected via auxiliary and Bluetooth may have their
own volume control which functions separately from the speak-
er's volume. If you are connecting a device which allows you
to adjust its volume separately, we recommend that the volume
on the device not be set to maximum. When set to its maximum
a s
udIo
speaker using various protocols (such as Play-Fi
Fi) connection is used to connect to a LAN, there is no need to use an
Ethernet connection. However, in some installations, a 'hard-wired' Ethernet
connection may prove more desirable than a wireless connection.
I
nPut
Volume on source device and speaker are synced and control each other.
Soundbar will control volume level for audio input from most sources.*
Volume on Bluetooth device and volume on speaker are controlled separately.*
c
treamIng onnectIons
VOLUME BEHAVIOR
setting, the amplifier in the external device is likely to introduce
elevated levels of distortion into the audio signal which, in turn,
will be further amplified by the speaker. Find a volume between
50–75% of the device's maximum volume and use your speak-
er's volume control to adjust the final playback volume.
or AirPlay). If a wireless (Wi-
®
17