Display; The Menu System; Entering And Exiting The Menu; Navigating The Menu - Martin Logan Verse Manuel De L'utilisateur

d
IsPlay
Fig. 10
Your soundbar displays the following information:
Audio Codec Status: If an audio signal with
surround sound encoding is detected this icon will
indicate Dolby Digital or DTS Digital
®
Volume Level: Displays the current volume level.
Current Input: This icon indicates the input that
is currently active using its standard input name.
This field is not customizable.
t m s
he enu ystem

ENTERING AND EXITING THE MENU

To access the menu from the remote, press 'Menu'.
To exit the menu from the remote, press 'Menu'
again. To access the menu from the control panel
press the menu button. To exit, press the menu but-
ton again. The menu auto exits after 30 seconds.
20
[Volume Level]
Surround™.
[Audio Codec Status]
[Current Input
Custom Name]
Current Input Custom Name: This indicates
the input that is currently active using its custom
user defined name.
Anthem Room Correction Status: This icon
indicates that Anthem Room Correction is active. This
icon will not display if an Anthem Room Correction
has been manually turned off or an adjustment curve
has not been uploaded to the soundbar. For infor-
mation on setting up ARC, please refer to the
"(ARC™) Anthem Room Correction" section of this
manual.

NAVIGATING THE MENU**

The menu is navigated using the 'up/down/left/
right/enter' navigation system. Up and Down are
used to cycle through the menu and submenu options.
Right or Enter/Select are used to access a sub-
menu or to select an option. With the remote, left is
used to exit a submenu and go back one level.
[Current Input]
OPTICAL 1
[Anthem Room
Correction Status]