Anthem Room Correction - Martin Logan CADENCE Mode D'emploi

soundbar. This is useful if you have multiple sources
hooked up to both your television and your soundbar
and always want your soundbar to play audio.
HDMI > HDMI ARC > Off or On: This option
turns the HDMI Audio Return Channel feature off or
on. Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
HDMI > HDMI CEC: Enter the submenu by press-
ing the enter button. Here you may turn HDMI CEC
on and off. HDMI CEC (Consumer Electronics
Control) allows all compatible devices to be con-
trolled by one remote control and exchange remote
commands via the HDMI connection.
HDMI > HDMI CEC > Off or On: This option
turns the Consumer Electronics Control feature off
or on. Activate by pressing the enter button and
the soundbar will respond with 'Saved'.
HDMI > HDMI Bypass: Enter the submenu by
pressing the enter button. Here you may choose the
HDMI input to use with standby HDMI bypass. This
feature allows the soundbar to send audio/video
signals from HDMI connected sources to your televi-
sion, even when you don't want to power on the
soundbar and listen to audio through it.
HDMI > HDMI Bypass > Off: This option
turns off the standby HDMI Bypass feature. When
the soundbar is in standby it will not pass audio/
video out of HDMI. Activate by pressing the enter
button and the soundbar will respond with 'Saved'.
HDMI > HDMI Bypass > Last Used: This
option turns on the standby HDMI Bypass feature
and passes audio/video from the last HDMI input
you used while the soundbar is in standby mode.
Activate by pressing the enter button and the
soundbar will respond with 'Saved'.
HDMI > HDMI Bypass > HDMI 1 or HDMI 2
26
or HDMI 3: This option turns on the standby HDMI
Bypass feature and passes audio/video from the
HDMI 1, HDMI 2, or HDMI 3 input while the sound-
bar is in standby mode. Activate by pressing the enter
button and the soundbar will respond with 'Saved'.
HDMI > Lip Sync: Enter the submenu by press-
ing the enter button. Here you may adjust the
audio/video sync for the HDMI inputs. Adjust this
setting if the timing of the audio content does not
match the video content.
HDMI > Lip Sync > HDMI ARC or HDMI 1
or HDMI 2 or HDMI 3: Enter the submenu by
pressing the enter button. Here you choose which
input you are adjusting lip sycn for.
HDMI > Lip Sync > HDMI ARC or HDMI 1
or HDMI 2 or HDMI 3 > 0ms to 300ms: Using
the up/down directional buttons, choose the desired
delay (from 0 milliseconds to 300 milliseconds).
Adjust this setting until the audio and video from your
HDMI sources are synchronized. If your audio and
video from HDMI sources is already synchronized,
leave this set to 0ms. Lip sync will be automatically
set to match the value currently displayed.
MENU: ANTHEM ROOM CORRECTION
Anthem Room Correction: Enter the sub-
menu by pressing the enter button. Here you
may turn Anthem Room Correction on and off.
Using proprietary processes, a microphone, and
the power of your PC, the ARC system analyzes
your soundbar's in-room sound, then computes the
required correction to yield optimal performance
within your acoustic environment.
Anthem Room Correction > Off or On: This
option turns the Anthem Room Correction feature on
or off. Activate by pressing the enter button and the
soundbar will respond with 'Saved'. Please note, turn-