Breville the Thermal Pro BEF450XL Mode D'emploi page 13

PAge heAder..... CARE & CLEANING
Do not leave plastic cooking utensils
in contact with the hot skillet surface
while cooking.
Before cleaning, switch the skillet to the
off position and unplug from the power
outlet. Remove the Temperature Control
Probe when cooled from the probe socket
of the appliance.
TEMPERATURE CONTROL PROBE
If cleaning is necessary, wipe the
Temperature Control Probe over with a
slightly damp cloth. Ensure it is completely
dry before use. Never immerse the
Temperature Control Probe, plug or cord
in water or any other liquid.
PFOA-FREE NON-STICK COOKING
SURFACE
Cooking on a non-stick surface minimizes
the need for oil as food does not stick and
cleaning is easier.
Any discoloration that may occur on the
non-stick surface may detract from the
appearance of the skillet but will not affect
the cooking performance.
Do not use metal (or other abrasive)
scourers when cleaning the non-stick
coating. Wash with hot soapy water.
Remove stubborn spots with a soft plastic
washing pad or nylon washing brush.
Rinse and dry thoroughly.
REMOvING dISCOLORATION OF
THE NON-STICK SURFACE
1. Combine 2 tablespoons baking soda,
¼ cup household bleach, 1 cup water.
2. Pour into the skillet, place lid on
with the vent closed, and simmer
for 5–10 minutes.
3. Clean in a well-ventilated area and
avoid breathing in the vapours. Wash as
directed before re-use. In some instances
this may not remove all the staining.
12
GLASS HIGH dOMEd LId
Wash the lid in warm soapy water using a
soft sponge, rinse and dry thoroughly.
NOTE
Take care when the glass lid is hot.
Do not place hot lid under cold water
or on cold surfaces. This may cause
the lid to break.
dISHWASHER SAFE
The lid and cooking pan are dishwasher
safe for easy cleaning. The recessed heating
element is completely sealed so it is safe to
immerse in water.
The skillet may also be washed in hot,
soapy water. Dry thoroughly.
NOTE
Before inserting the temperature
control probe into the skillet socket,
ensure the interior of the skillet socket
is fully dry. To do this, shake out
excess water then wipe the interior
of the socket with a dry cloth.