Main Elements Of The Wagner Ep 2800 Spacspray; Driving Gear; Electric Motor; Motor Safety Switch - WAGNER EP 2800 Spacspray Mode D'emploi

Main elements of the WAGNER
EP 2800 Spacspray

1. Driving gear

1 2
4
1 Crankshaft
2 Gear housing

3 Electric motor

4 Mains cable

5 Motor safety switch 0 – 1
6 Pressure regulator switch
Important: When using on building sites use 16 A slow-
blow fuses because of possible drops in voltage.
Electric motor
For changing universal carbon brushes see
"Maintenance", page 26.

Motor safety switch

The safety switch automatically switches the motor off if
it overloaded.
After about 2 - 3 minutes switch the motor safety switch
back on.
Mains cable
Length 3 m, diameter 3 x 1.5 mm
RN-F3G1.5.
Attention: It is always important, especially when
working at large distances from the power supply (long
feeder cable or in the country) that the extension cable
used has the above described specifications.
Furthermore, make sure that the connections are in
perfect working order! Loss of voltage makes it more
difficult to start the motor and reduces the performance
of the unit.
3
5 6
2
specification HO7
GB

2. Material feed pump

5
4
3
2
1 Connection – high-pressure hose to high-pressure
filter
2 Intake hose with filter
3 Return hose
4 Material feed pump
5 Angled connection

3. High-pressure fittings

1. High-pressure filter
2. Relief valve
3. Pressure gauge
4. Connection for high-pressure hose
5. Swivel piece for connecting high-pressure hose to
material feed pump
21
1
3
1
2
4
5