Coating Materials Suitable For Use; Coating Materials Not Suitable For Use; The Following Materials Can Only Be Processed With Optional Accessories; Preparation Of The Coating Material - WAGNER WOOD & METAL SPRAYER W 300 Mode D'emploi

W 300

5. Coating Materials Suitable for Use

Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.

6. Coating Materials Not Suitable for Use

Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Flammable materials.
7. The following materials can only be processed with
optional accessories:
Interior wall paint (dispersions and latex paint)

8. Preparation of the Coating Material

The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet Download).
1. Stir the material up and put the required amount into the paint container.
Sprayed material
Glazes
Wood preservatives, mordants, oils, disinfection agents,
plant protective agents
Paints containing solvents and water-soluble paints,
primers, vehicle coating paints, thick-film glazes
2. If the convey capacity is too low, add 5 - 10 % dilution step-by-step until the convey
capacity fulfils your requirements.
Thinning recommendation
GB
undiluted
undiluted
dilute by 5 - 10 %
21