Important - Medela Pump In Style Advanced Mode D'emploi

Masquer les pouces Voir aussi pour Pump In Style Advanced:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING: To avoid health risk and reduce the risk of injury:
• This product is intended for use by a single user only and should not be shared between
users.
• Do not drive while pumping.
• Never use while pregnant, as pumping can induce labor.
• Clean and sanitize all parts that come in contact with your breast and breast milk prior to fi rst
use.
• Wash all parts that come in contact with your breast and breast milk after every use.
• Inspect all appropriate pump components before each use.
• Do NOT continue pumping for more than 2 consecutive pumping sessions if no results are
achieved.
• Do not thaw frozen breast milk in a microwave or in a pan of boiling water.
• If tubing becomes moldy, discontinue use and replace tubing.
• If breast milk backup occurs, you must clean tubing, faceplate and diaphragm before your
next pumping session.
CAUTION: Can lead to minor injury:
• Do NOT wrap cord around adaptor body.
• Use only the power adaptor that comes with the Pump In Style
• Use only the Pump In Style Advanced battery pack that comes with the Pump In Style Breast
Pump.
• Pump only with the breast pump in an upright position.
• Do NOT shorten tubing.
• Make sure the voltage of the power adaptor is compatible with the power source.
• Plug the power adaptor into the breast pump fi rst and then into the wall socket.
• Do NOT use antibacterial or abrasive cleaners/detergents when cleaning breast pump or
breast pump parts.
• Never put breast pump motor in water or a sterilizer, as you can cause permanent damage to
the breast pump.
• Do not attempt to remove the breast shield from your breast while pumping. Turn the breast
pump off and break the seal between your breast and breast shield with your fi nger, then
remove breast shield from your breast.
• If pumping is uncomfortable or causing pain, turn the unit off, break the seal between the
breast and the breast shield with your fi nger and remove the breast shield from your breast.

IMPORTANT

• Plastic bottles and component parts become brittle when frozen and may break when
dropped.
• Bottles and component parts may become damaged if mishandled, e.g. dropped, over-
tightened, or knocked over.
• Take appropriate care in handling bottles and components.
• Do not use the breast milk if bottles or components become damaged.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
SAVE THESE INSTRUCTIONS
®
Advanced Breast Pump.
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pump in style advanced double

Table des Matières