Medela Pump In Style Advanced Mode D'emploi page 14

1. Cleaning (cont.)
Note
• Make sure faceplate and diaphragm are
completely dry before reseating.
• The faceplate must be seated correctly
and snapped together at all connection
points. This ensures the pump will
have adequate vacuum and optimum
performance.
14
1.4 Tubing, Faceplate
and Diaphragm
Cleaning (cont.)
7
Snap off the faceplate using the
thumb tab.
10
Locate the 3 connection points
on the reverse side of the
faceplate and on the pump.