Nice MhouseKit GD1N Instructions Et Avertissements Pour L'installation Et L'utilisation page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GTX4 Transmitters
Type
Adopted technology
Frequency
Coding
Buttons
Irradiated power
Power supply
Battery life
Operating ambient temperature
Use in particularly acid, saline
or potentially explosive atmo-
spheres
Protection rating
Dimensions / weight
PH00 Photocells (optional)
Type
Adopted technology
Detection capacity
TX transmission angle
RX reception angle
Useful capacity
Power supply
Current absorption
Maximum cable length
Routing possibility
Operating ambient temperature
Use in particularly acid, saline
or potentially explosive atmo-
spheres
Assembly
Protection rating
Dimensions / weight
28 – English
Radio transmitters for remote control of automations for automatic gates and doors
AM OOK coded modulation of radio carrier
433.92 MHz
Rolling code with 64 Bit code (18 billion billion combinations)
4, each button can be used for the different controls of the same control unit or to control different
control units
approx. 0.001 W
3V +20% -40% with 1 CR2032 type lithium battery
3 years, estimated on the basis of 10 commands/day, each lasting 1s at 20°C (at low tempera-
tures the efficiency of the batteries decreases)
-20 ÷ 50°C
No
IP40 (suitable for use indoors or in protected environments)
50 x 50 h 17 mm / 16 g
Presence detector for automated gates and doors (type D according to EN standard 12453) con-
sisting of a "TX" transmitter and an "RX" receiver
Direct TX-RX optical interpolation with modulated infrared ray
Opaque objects located on the optical axis between TX and RX, larger than 50mm and moving
slower than 1.6m/s
approx. 20°
approx. 20°
7m (15m with jumper ">10m." cut) for maximum TX-RX misalignment of ± 5° (The capacity could
reduce further in the case of adverse weather conditions: fog, rain, snow, dust, etc...)
Without jumper: 24 Vac/Vcc (limits 18÷35 Vcc,15÷28Vac), with jumper "12V": 12 Vac/Vcc (limits
10÷18 Vcc, 9÷15 Vac)
25mA - RX, 30mA - TX = 55mA per torque
Up to 20 m (observe the directions regarding the minimum gauge and type of cable)
Up to 7 detectors with protection function and 2 with open command function
Automatic synchronism avoids the interference among the various detectors
-20 ÷ 50°C
No
Vertical, wall-mounted
IP44
95 x 65 h 25 mm / 65 g

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mhousekit gd10n

Table des Matières