Symbols Used On The Saw; Symbols Used In The Instructions; General Safety Instructions For Power Tools - Grizzly EKS 1835-2 QTX Traduction De La Notice D'utilisation Originale

GB

Symbols used on the saw

Caution! Danger!
Read and take note of the operating
manual belonging to the machine!
Caution! Spring-back - Be careful of
spring-back of the machine during
work.
Do not expose the unit to rain. The
device must not be wet, nor should it
be operated in a moist environment.
Caution! Remove the plug immedi-
ately from the plug socket in case
of damage or cutting through of the
mains cable
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face protec-
tion, safety helmet,
working clothes
Wear cut-protection
Wear cut-protection safety boots
with anti-slip soles.
Use protective clothing.
L
WA Sound power level guaranteed
dB
Length of the chain bar
Machines do not belong with do-
mestic waste.
Safety class II
106
Always use the chain-
saw with both hands.
cut-protection
and ear protection.
gloves.
Symbol on the oil filler cap:
Indication on oil filler neck
Symbol on the fixing screw for the
chain wheel cover:
Open

Symbols used in the instructions

Hazard symbols with information
on prevention of personal injury
and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on prevention
of harm / damage.
Notice symbol with information on
how to handle the device properly.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions� Omissions
in the compliance with safety direc-
tions and instructions can cause
electrical shock, fire and/or severe
injuries.
Retain all safety directions and instruc-
tions for future use�
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery- oper-
ated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in ex-
Closed