Güde 95165 Mode D'emploi page 11

Introduction
To enjoy your new appliance as long as possible, please read
carefully the Operating Instructions and the attached safety
instructions before using it. Further, we recommend keeping
the Operating Instructions to recall the product features in the
future.
Within the continuous product development, we reserve the
right to make technical changes to improve it.
This document represents original Operating Instructions.
ILLUSTRATIVE PICTURES!
Supply includes
Take the appliance out of the transport package and check it
whether there are the following parts:
1 piece Basic appliance
1 piece Extension – lopping shears with guard
1 piece Extension – chainsaw with guard
1 piece Shoulder strap
1 piece Multifunctional wrench
1 piece Handle with screw
1 piece User Guide
Please contact your dealer if any parts are missing or are
damaged.
Appliance description (pic. 1)
Including variable telescopic pole for comfortable treatment of
wood species. Basic appliance – with variable telescopic
adjustment of 1.68 m – 2.67 m to reach very high.
1. Main handle
2. Unlocking button for On/Off
3. Feeder cable and system plug
4. Locking button for handle turning
5. Shoulder strap
6. On/Off
7. Handle
8. Bottom pole
9. Upper pole
10. Telescopic pole adjustment
11. Angle locking screw
a. Extension - chainsaw
12. Oil tank
13. Saw chain
14. Chain bar
15. Screw
b. Extension – lopping shears
15. Screw
16. Cutter bar
Technical specifications:
Basic appliance details:
Voltage/frequency:
Protection type/class:
Engine output:
Telescopic pole length:
Feeder cable:
Noise:
Weight:
Pole saw details:
Bar length:
Cut length:
Cutting speed:
Oil tank:
2 IN 1,800 W
230 V~50 Hz
IP 20 / II
800 W (P1)
0-990 mm
350 mm
Lwa 103 dB(A) *
5.4 kg
240 mm
180 mm
13 m per second
0.2 l
Lopping shears details:
Bar length:
Cut length:
Max. cutting width:
Idle speed:
Art. No.
* Noise information
Measured values learnt according to 2000/14/EG
(1.60 m height, 1 m distance) – measurement tolerance +-
3dB
Important basic safety instructions
Please read carefully the following safety regulations and
Operating Instructions before working with the appliance. If
the appliance is also handed to other persons, provide them
with the Operating Instructions. Keep the Operating
Instructions!
Package: To prevent the appliance against damage, it is in a
package during transport. Packages are raw materials and
can therefore be reused or recycled.
Please read carefully the Operating Instructions and follow all
included instructions. Use these Operating Instructions to
familiarise with the appliance, how to use it properly and with
the safety instructions. Please keep these instructions for
future reference.
•
The appliance must not be used if the operator is tired or
under the influence of alcohol, pharmaceuticals or drugs.
•
Appliances not being used must be kept in a dry and
locked places, inaccessible to children.
•
Keep the tools sharp and clean so that working with them
is better and safer. Check regularly the appliance cable
and have it replaced by a recognised professional if
damaged.
•
Never use the cable to carry the lopping shears or pulling
the plug out of socket. Protect the cable against excess
temperatures, oil and sharp edges.
•
Applicable accident prevention regulations, generally
recognised safety-technical rules must be followed.
•
Unplug the appliance for any adjusting and servicing.
•
All protective and safety equipment must be immediately
refitted after finishing any repair or servicing work.
•
Any damaged or defective protective equipment must be
immediately replaced.
•
Any electrical installation, repair and servicing may only
be performed by professionals.
•
Do not wear any loose clothing and jewels. They could
get caught by the rotating chain. Wear a hairnet if you
have long hair! Wear a respirator (when working in a
dusty environment).
•
Wear heavy protective gloves, safety shoes with safety
steel insole and anti-slip sole.
•
Hold the cutting tool from all parts of your body during
operation.
•
Do not switch the appliance on if turned over or not in the
working position.
•
Keep the appliance out of reach of other persons,
especially children and pets.
•
If work is interrupted, keep the appliance in a safe place.
•
All parts of the appliance must be regularly checked for
any damage or aging. The appliance must not be used if
not in a perfect state.
•
Cut only in daylight or under adequate artificial lighting.
•
Never use the lopping shears when raining. Avoid any
wet and damp conditions. Do not let the shears outdoors
overnight. Do not cut wet or damp grass.
•
Original spare parts to be used for repairs only.
•
Before putting the appliance into operation and after any
impact, check it for any signs of wear or damage and
have any necessary repairs executed.
•
Never use spare parts and accessory equipment not
specified or recommended by the manufacturer.
•
Make sure that other items do not cause short circuit on
the appliance contacts.
11
430 mm
350 mm
24 mm
-1
1,500 per min
95165