Frequently Asked Questions - MINN KOTA EDGE Manuel D'utilisation

FREQUENTLY ASKED QUESTIONS

Can I get replacement parts for my Minn Kota trolling motor?
Yes, we would be glad to help you with this. Please contact us for replacement parts
in the U.S.A. at 1 800 227 6433. In Canada, call 1 800 263 6390.
Can my freshwater Minn Kota trolling motor be used in saltwater?
We designed a special line of motors for use in salt or brackish water. The Minn Kota
Riptide trolling motors have a number of "saltwater-engineered" enhancements,
including stainless steel hardware, sealed electrical connections and an advanced
painting process for improved corrosion protection. Using any of our standard Minn
Kota motors in saltwater may dramatically reduce the life of the motor and voids
manufacturer's warranty. To extend the life of your Minn Kota Riptide saltwater trolling
motor, thoroughly rinse the motor with freshwater after every use in saltwater and store
indoors. Never leave the motor submerged in saltwater when the boat is moored.
What about shaft length selection?
Choosing the correct shaft length is important so that the angler's electric motor does
not cavitate, creating fish-spooking noise. The rule of thumb is that the center of the
motor section should be submerged 9". In general, shaft length selection is more critical
with bow-mount motors versus transom-mount motors. Most boat transoms are similar
in their distance to the water, and Minn Kota's standard transom shaft lengths should be
adequate. With bow-mounted motors, there is much greater variation in shaft length
requirements. Measure down from the mounting surface of the transom or bow to
the water level. Add 5" to waterline measurement for fishing in rough water. Add 12"
to waterline measurement for steering a hand control motor while standing. Use this
measurement and the tables below to find the appropriate shaft length.
minnkotamotors.com 17