Selecting The Correct Batteries - MINN KOTA EDGE Manuel D'utilisation

outside of engine spaces.
2.
Each conductor has 105°C temp rated insulation.
3.
No more than 5% voltage drop allowed at full motor power based on published
product power requirements.
Reference:
United States Code of Federal Regulations: 33 CFR 183 – Boats and Associated Equipment
ABYC E-11: AC and DC Electrical Systems on Boats

Selecting the Correct Batteries

The motor will operate with any deep cycle marine 12 volt battery/batteries. For
best results use a deep cycle, marine battery with at least a 115 ampere hour rating.
As a general on the water estimate, your 12 volt motor will draw one ampere per
hour and your 24 volt motor will draw .75 ampere per hour for each pound of thrust
produced when the motor is running on high. The actual ampere draw is subject
to your particular environmental conditions and operation requirements. Maintain
battery at full charge. Proper care will ensure having battery power when you need
it, and will significantly improve the battery life. Failure to recharge lead-acid batteries
(within 12-24 hours) is the leading cause of premature battery failure. Use a variable
rate charger to avoid overcharging. If you are using a crank battery to start a gasoline
outboard, we recommend that you use a separate deep cycle marine battery/
batteries for your Minn Kota trolling motor.
minnkotamotors.com 11