Repair And Warranty - Megger BM400/2 Série Guide De L'utilisateur

Masquer les pouces

Table Des Matières

Table des Matières

The instrument circuit contains static sensitive devices, and care must be

taken in handling the printed circuit board. If the protection of an instrument

has been impaired it should not be used, and be sent for repair by suitably

trained and qualified personnel. The protection is likely to be impaired if, for

example, the instrument shows visible damage, fails to perform the intended

measurements, has been subjected to prolonged storage under

unfavourable conditions, or has been exposed to severe transport stresses.

New Instruments are Guaranteed for 1 Year from the Date of

Note: Any unauthorized prior repair or adjustment will automatically

invalidate the Warranty.

Instrument Repair and Spare Parts

For service requirements for

Megger Limited

Archcliffe Road

Dover

Kent, CT17 9EN

England

Tel: +44 (0) 1304 502243

Fax: +44 (0) 1304 207342

or an approved repair company.

Approved Repair Companies

A number of independent instrument repair companies have been approved

for repair work on most

parts. Consult the Appointed Distributor / Agent regarding spare parts, repair

facilities and advice on the best course of action to take.

Returning an Instrument for Repair

If returning an instrument to the manufacturer for repair, it should be sent

freight pre-paid to the appropriate address. A copy of the Invoice and of the

packing note should be sent simultaneously by airmail to expedite clearance

through Customs. A repair estimate showing freight return and other

charges will be submitted to the sender, if required, before work on the

instrument commences.