Repair And Warranty - Megger S1-5001 Guide De L'utilisateur

The instrument circuit contains static sensitive devices, and care
must be taken in handling the printed circuit board. If the
protection of an instrument has been impaired it should not be
used, and be sent for repair by suitably trained and qualified
personnel. The protection is likely to be impaired if, for example,
the instrument shows visible damage, fails to perform the
intended measurements, has been subjected to prolonged
storage under unfavourable conditions, or has been exposed to
severe transport stresses.
New Instruments are Guaranteed for 1 Year from the Date of
Purchase by the User.
Note: Any unauthorized prior repair or adjustment will
automatically invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger
Megger Limited or Megger
Archcliffe Road Valley Forge Corporate Center
Dover 2621 Van Buren Avenue
Kent, CT17 9EN. Norristown, PA 19403
England. U.S.A.
Tel: +44 (0) 1304 502243 Tel: (610) 676-8579
Fax: +44 (0) 1304 207342 Fax: (610) 676-8625
or an approved repair company.
20

Repair and Warranty

Instruments contact :-
®
Approved Repair Companies
A number of independent instrument repair companies have been
approved for repair work on most Megger instruments, using
genuine Megger spare parts. Consult the Appointed Distributor /
Agent regarding spare parts, repair facilities and advice on the
best course of action to take.
Returning Instrument for Repair
If returning an instrument to the manufacturer for repair, it should
be sent freight pre -paid to the appropriate address. A copy of the
Invoice and of the packing note should be sent simultaneously by
airmail to expedite clearance through Customs. A repair estimate
showing freight return and other charges will be submitted to the
sender, if required, before work on the instrument commences.