Connecting The Battery; Weld Output Terminals - Miller Blue Star 185 Manuel Du Propriétaire

5-6. Connecting The Battery

Tools Needed:
1/2 in.

5-7. Weld Output Terminals

Tools Needed:
3/4 in.
.
Complete Parts List available at www.MillerWelds.com
+
−
1
2
! Turn Engine Switch to Off.
! Connect negative (−)
cable last.
268 699
! Turn off power before con-
necting to weld output termi-
nals.
! Do not use worn, damaged,
undersized, or repaired
cables.
1 Positive (+) Weld Output
Terminal
2 Negative (−) Weld Output
Terminal
For Direct Current Electrode Posi-
tive (DCEP), connect work cable to
Negative (−) terminal and electrode
holder to Positive (+) terminal.
For Direct Current Electrode nega-
tive (DCEN), reverse cable con-
nections.
268 699
OM-267 212 Page 23