Table des Matières
Publicité
.
Follow the storage procedure in the engine owner's manual if the unit will not be used for an extended period.
8-1. Routine Maintenance
n = Check
* To be done by Factory Authorized Service Agent
Z Oil After First 5 Hours
Every
50
Hours
~ Weld Terminals
Every
100
Hours
nl Air Filter Element
Every
200
Hours
l Unreadable Labels
Every
500
Hours
0.030 in.
l Spark Plug Gap
OM-267 212 Page 28
SECTION 8 − MAINTENANCE
Z = Change
~ = Clean
n Fuel Level Every 8
Hours
~ Cooling System
~ Battery Terminals
n~ Slip Rings*
nl Brushes*
.
Complete Parts List available at www.MillerWelds.com
!
Stop engine before maintaining.
.
See Engine Manual and Maintenance Label
Recycle engine
for important start-up, service, and storage
fluids.
information. Service engine more often if
used in severe conditions.
l = Replace
n Oil Level Every 8 Hours
~ Oil, Fuel Spills Every 8
Hours
nl Fuel Filter
Z Oil
nl Weld Cables
0.005 − 0.007 in.
Intake & Exhaust
nValve Clearance*
l Air Cleaner Element
Reference
Engine
Manual
Engine
Manual,
Section 8-3,
8-4, 8-5
Engine
Manual,
Section 8-3
Publicité
Table des Matières
