Section 4 − Specifications; Serial Number And Rating Label Location; Weld, Power, And Engine Specifications; Dimensions, Weights, And Operating Angles - Miller Blue Star 185 Manuel Du Propriétaire

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the generator. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Weld, Power, And Engine Specifications

Weld
Welding
Output
Mode
Range
CC/DC 60 − 195 A

4-3. Dimensions, Weights, And Operating Angles

Dimensions
Height 24-3/4 in. (629 mm)
Width 20-3/32 in. (510 mm)
Depth 31-1/4 in. (794 mm)
A 31-1/4 in. (794 mm)
B 7-39/64 in. (193 mm)
C 15-3/32 in. (383 mm)
D 20-3/32 in. (510 mm)
E 1-11/32 in. (34 mm)
F 16-27/32 in. (428 mm)
G 13/32 in. (10 mm) Dia.
Weight
296 lb (134 kg)
Optional Lifting Eye
Weight Rating
430 lb (195 kg)
OM-267 212 Page 16
SECTION 4 − SPECIFICATIONS
Maximum
Rated
Open Circuit
Welding Output
Voltage
185 A, 25 V,
20% Duty Cycle
80
150 A, 25 V
100% Duty Cycle
B
C
A
E
.
Complete Parts List available at www.MillerWelds.com
Generator
Power Rating
Single-Phase,
6.5 kVA/kW (Peak)
6.2 kVA/kW
(Continuous)
40/23 A,
120/240 V AC,
60 Hz
Engine End
D
!
!
G
F
Fuel
Engine
Capacity
Kohler CH440
Air-Cooled,
One-Cylinder,
6.25 gal (23 L)
Four-Cycle,
Tank
13.4 HP
Gasoline Engine
(Electric-Start)
Do not exceed tilt angles or engine could
be damaged or unit could tip.
Do not move or operate unit where it
could tip.
268 701