CASO DESIGN Dry-Aged Cooler 688 Mode D'emploi Original page 38

LED and UV light settings
Press 1 x , to switch the LED light on, it will automatically switch itself off after 4
hours. Press
► The door has a safety switch. If you open the door of the equipment, the UV light will
automatically switch itself off in order to protect your eyes. Never look directly at the UV
light.
► The UV light is used to clean the interior after finishing of ageing process. Do not
switch the light on when food is in the interior.
By pressing both the
you can change between °C and °F.
Setting the temperature or humidity:
With you can switch between the setting and display of temperature or humidity.
You can adjust temperature 2-8°C in 1°C steps and humidity in 1 % steps.
If you do not change the setting within 5 seconds, than the device will return to its
previous setting.
The device automatically returns to the temperature display.
After 1 hour, you can put the meat in the appliance. Place the drip pan under the meat
beforehand.
For ideal maturity results we recommend the following setting: temperature 3°C / air
humidity 75%.
for 5 seconds to switch UV light on.
PLEASE NOTE
key and the key at the same time for 3 seconds,
38