Delivery Scope And Transport Inspection; Unpacking; Disposal Of The Packaging; Setup - CASO DESIGN Dry-Aged Cooler 688 Mode D'emploi Original

Masquer les pouces Voir aussi pour Dry-Aged Cooler 688:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47

14.2 Delivery scope and transport inspection

As a rule, the device is delivered with the following components:
 Dry-Aged Cooler
 3 metal storage shelves
 Operating Instructions with handle and screws
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

14.3 Unpacking

To unpack the device, proceed as follows:
 Remove the device out of the carton and remove the packaging material.
 The device should only be moved in an upright position.
 Clean the interior surface with lukewarm water using a soft cloth.
 After at least 12 hours, plugging the appliance into the wall outlet, than place meat in the
appliance.
► Only remove the blue protective film shortly before setting up the device in the location
where it will be used, to prevent scratches and dirt accumulations.

14.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled. Returning the packaging back to the
material loop saves raw materials and reduces the quantities of accumulated waste.
Take any packaging materials that are no longer required to "Green Dot" recycling
collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the
guarantee period of the device, in order that the device can be re-packaged properly in
the event of a guarantee claim.

14.5 Setup

14.5.1

Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 Place your appliance on a floor that is strong enough to support the appliance when it is
fully loaded.
 Metal suspension system, including 4 meat hooks
 Drip pan
PLEASE NOTE
PLEASE NOTE
PLEASE NOTE
 Water tank
34

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dry-aged cooler688

Table des Matières