Cleaning The Equipment - ST Quadrat LUX-top KLICK II Mode D'emploi

Maintenance, care and testing:
®
The LUX-top KLICK II anchor device must be tested as and when necessary, however, at
least once every 12 months, by a competent person precisely following the manufacturer's
instructions.
This inspection is essential, as the safety of the user depends on the effectiveness and
durability of the anchor device.
The test is to be arranged by the owner.
An inspection log card is included in the appendix to these user instructions, on
which the inspection by the competent person must be documented.
The date of the next scheduled inspection must always be entered on the inspection log card.
Prevent contact between the stainless steel anchor device and "black" steel (including in the
form of grinding dust), as well as chemicals and other aggressive substances!

Cleaning the equipment

®
The LUX-top KLICK II anchor device is weather resistant.
Depending on the use conditions, the anchor device must be cleaned occasionally with a brush
and hot water.
Avoid any contact with acids, bitumen, cement, chloride, paint or aggressive cleaning liquids.
Never use aggressive cleaning products or chemicals!
Miscellaneous:
Changes or additions to the anchor device may only be made with the prior written consent of
the manufacturer. Equally, all repairs may only be carried out in agreement with the
manufacturer. If sold on to another country, to ensure the safety of the user the instructions
for use, maintenance, the regular checks and repairs must be available in the language of the
other country.
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.st-quadrat.lu
Page 12 Version 05/2015