ST Quadrat LUX-top KLICK II Mode D'emploi page 21

Before each use of the system, the user must check whether the locking mechanism
has locked properly! To do this, after inserting the anchor eyebolt in the respective
anchor sleeve, always check whether the green check ring on the release pin is
visible.
Only then may the PPE against falling be fixed onto the anchor point.
If the check ring has not emerged completely, use of the anchor point is strictly
prohibited!!!
®
The LUX-top KLICK II
 Restraint systems
 Fall arrest systems
 Rescue systems
The respective user instructions of the other PFPE and abseiling (descent) and
rescue equipment used must also be noted and followed!
®
The LUX-top KLICK II
rope-assisted access techniques (abseiling work, etc.)!
®
The LUX-top KLICK II

®
LUX-top KLICK II
fixing material.

Instructions for use including installation instructions
Materials:
- Stainless steel (body with anchor eyebolt / anchor sleeve)
- Aluminium (release pin)
- FKM (check ring)
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.st-quadrat.lu
can be used in the following fall protection systems to EN 363:2008:
is not suitable for use as an anchor point for suspension systems for
anchor device consists of the following components:
anchor point with anchor eyebolt as well as anchor sleeve and
Page 6 Version 05/2015