Accessories; Dimensions; Hydraulic Nuts - Hmv - SKF HMV Mode D'emploi

3.3 Accessories

Description
Mounting luid (5 litres)
Dial indicators

4. Dimensions

In the following tables dimensions are given for SKF standard hydraulic nuts HMV...E
(metric) and HMVC...E (inch).
The nuts can also be made in other sizes, with special threads, or with unthreaded bores.
Additional information will be provided on request.
4.1 Hydraulic nuts - HMV...E series
Threads
HMV 10E - HMV 40E
HMV 41E - HMV 200E
Recommended mating threads
HMV 10E - HMV 40E
HMV 41E - HMV 200E
12
Il Cuscinetto srl - www.ilcuscinetto.it - info@ilcuscinetto.it
Designation
LHMF 300/5
TMCD 5P (parallel dial, 0-5 mm)
TMCD 10R (right angle dial, 0-10 mm)
TMCD 1/2R (right angle dial, 0 -
ISO 965/III-1980, tolerance class 6H
ISO 2901-1977, tolerance class 7H
ISO 965/III-1980, tolerance class 6g
ISO 2901-1977, tolerance class 7e
/ in)
1
2
SKF HMV / HMVC