Required Bearings And Accessories (Not Included With Tmds 6) - SKF TMDS 6 Mode D'emploi

26 Locknut Spanner
27 Aluminium Heating Ring
28 Feeler Gauge
29 Hook Spanner
30 Quick Connections Nipple
31 Mounting Fluid
32 Dismounting Fluid
33 Dial Indicator
34 Hook Spanner
4. Required bearings and accessories
(not included with TMDS 6)
Bearing
22320 EK/C3
22318 EK/C3
6006
6315
6318
1209 EKTN9/C3
NU 216ECP
Note: Demonstration Unit TMDS 6 includes Turning Table, Shafts and
Accessories (1 to 18) as shown in section 2.
Demonstration Unit TMDS 6/1 includes Turning Table, Shafts,
Accessories and Tools (1 to 34) as shown in section 2 and section 3.
Demonstration Unit TMDS 6/1US is the same as TMDS 6/1 except the
TIH 030m/220V is replaced by TIH 030M/110V.
Warning: Never dismount a bearing from a tapered seating by means of the Oil injection
Method without having an hydraulic nut or an SKF locking nut screwed onto the
shaft end. Make sure that the bearing bore, as well as the shaft seating are clean
and slightly coated with oil before mounting.
SKF TMDS 6
TMHN 7
TMBR NU 216EC
729865 A
HN 18–20
729100
LHMF 300/5
LHDF 900/5
TMCD 5P
HN 17
Quantity Accessory
2 H 2320
1 AHX 2318
1 KM 17
1 MB 17
1 H 209
1 KM 20
1 MB 20
1
1
1
1
1
1
1
1
1
Quantity
1
1
1
1
1
2
2
5