SKF HMV Mode D'emploi page 12

nut. Drive the bearing up the taper the required distance. Use a dial indicator to monitor
the axial drive-up.
The starting hydraulic pressure (MPa/psi) and axial drive-up (mm) can be found at
skf.com/mount or by downloading the SKF Drive-up Method PC Program at skf.com.
Alternatively download the SKF Drive-up Method app on the App Store or on Google Play.
Figure 10. One sliding surface
Figure 12. Two sliding surfaces
Zero Starting
position position
Figure 14. Bearing position
10
Il Cuscinetto srl - www.ilcuscinetto.it - info@ilcuscinetto.it
Figure 11. One sliding surface
Figure 13. Two sliding surfaces
Final
position
SKF HMV / HMVC