Changing/Editing Values; Numeric Values - Struers Accutom-5 Mode D'emploi

Changing/Editing Values

Numeric Values

Accutom-5
Instruction Manual
Depending on the type of value, there are two different ways of
editing.
Cutting Method: 1. EMPTY METHOD
Wheel : B0D15 Speed : 2700 rpm
Feed :0.100 mm/s Force : MEDIUM
Rotation: OFF
Water : ON


Press MENU UP/DOWN


you want to change, e.g. Feed:

Cutting Method: 1. EMPTY METHOD
Wheel : B0D15 Speed : 2700 rpm
Feed :0.100 mm/s Force : MEDIUM
Rotation: OFF
Water : ON


Press ENTER

Two square brackets [ ] appear around the value.
Cutting Method: 1. EMPTY METHOD
Wheel : B0D15 Speed : 2700 rpm
Feed [0.100]mm/s Force : MEDIUM
Rotation: OFF
Water : ON


Press MENU UP/DOWN


the numeric value.


Press ENTER

or
Esc Press Esc, to keep the original value.


to select the numeric value


, to edit the value.


to increase or decrease

, to accept the new value.
13