Method Options; Saving A Method - Struers Accutom-5 Mode D'emploi

Method Options

Saving a Method

34
Accutom-5
Instruction Manual
While working with a specific method, you can save the changes you
have made in the database.

As soon as a parameter is changed in a cutting method,
F4:SAVE will be shown on the bottom line of the display.
Cutting Method: 1. EMPTY METHOD
Wheel : B0D15 Speed : 2700 rpm
Feed :0.200 mm/s Force : MEDIUM
Rotation: OFF
Water : ON
F4:SAVE


Press F4:SAVE to save the changes after
F4
all necessary parameters have been altered.

Save changes in method
1. EMPTY METHOD
ENTER: YES


Press ENTER
method.
Unless you have already named the method, the name will

automatically change from EMPTY METHOD to
UNNAMED METHOD. This will always show that at least
one parameter has been changed compared to a default
method.
When saving changes, the original method will be overwritten.
If you want to keep the original method, you should make a copy of the
method with a new name, thus making the changes in a copy rather than
changing the original method. See Copying a Method.
SAVE METHOD
?
ESC: NO

to save the modified
Important
