Struers Accutom-5 Mode D'emploi page 31

Cut-off Wheels
Accutom-5
Instruction Manual
If you want to use other than Struers cut-off wheels, these must be
configured to contain the correct values for force limit, wheel
thickness and speed.
To configure your own cut-off wheels,

Press MENU UP/DOWN

WHEELS.


Press ENTER
OFF WHEELS MENU.

CONFIGURATION OF CUT-OFF WHEELS
Cut-off Wheel :
Force Limit :
Wheel Thickness:
Speed :
F1:PREV. WHEEL F2:NEXT WHEEL
F4:RENAME


Press MENU UP/DOWN

changed.


Press ENTER
After changing the value,


Press ENTER
the previous screen.

Press F4 to rename the cut-off wheel.
F4
(see Editing Names for details).
In the options menu various items can be configured.

to select CUT-OFF

to activate the CUT-
USER2
MEDIUM
0.50 mm
3000 rpm

to select the value to be

to edit the value

to accept the new value and to return to
27