Reading the Display
The "heavy" arrows on the
display indicate the
direction in which the
sample holder is moved,
for example:
X-POSITIONS
Y-POSITIONS
12
Accutom-5
Instruction Manual
The display can show various kinds of information, for example about
the cutting method or about the sample position. A screen for a
cutting method could look as the following example:
Cutting Method: 1. EMPTY METHOD
Wheel :B0D15
Feed
:0.100 mm/s Force : MEDIUM
Rotation:
OFF
Water :
ON
Pressing one of the X-axis positioning keys will change the
screen to the following:
Absolute Position:
Relative Position:
F1:RESET F2:ADD F3:MOVE TO REL. ZERO
Pressing one of the Y-axis positioning keys will change the
screen to the following:
Absolute Position:
Relative Position:
Stop Position:
F1:RESET F2:SET STOP F3:MOVE TO
REL.ZERO
Esc Press Esc, to return to the cutting
method screen.
Speed : 2700 rpm
X-POSITIONS
15.255 mm
5.000 mm
Y-POSITIONS
55.7 mm
0.0 mm
20.0 mm