Burkert 8225 Notice D'utilisation page 46

4 OPERATION
After, the device will be immersed into the solution (temperature < T- or < 25 °C if T- > 25
°C) and the solution is heated up. The temperature compensation coefficients will
automatically be determined until T+ or 25 °C (if T+ < 25 °C) is reached. The values are
memorized and can be called up any time by selecting "SPECIAL" in the "AUTO" option.
T ° COEFF ENTER
CURRENT
CURRENT
WARNING: The temperature increase must
be slow in order to compensate the thermal
resistance of the sensor. Also avoid bubbles
appearing on electrode surface. The user
can quit the Teach-In function at any time
by pressing for a duration of 5 sec.
0......9
If the message "ERROR" appears on display,
it means that a problem has occured during
Teach-In option (for example, the liquid gas
been heated too quickly). In this case, the
operation must be repeated.
CURRENT
ENTER
LINEAR
ENTER
ENTER
AUTO
ENTER
ENTER
TEACH IN
ENTER
E-18-
CONDUCTIVITY 8225
TC = 00.00
0......9
TC = 02.10
NAOH
HNO3
H2SO4
The coefficients in
NACL
the "SPECIAL" option
equal zero until a
Teach-in function
SPECIAL
has
completed,
there
t e m p e r a t u r e
T- = 000
compensation of
the conductivity.
0......9
ENTER
T- = 015
ENTER
MEASURE
The message "MEASURE"
T ° = 065
appears only when
temperature
reached T-.
MEAS END
been
i.e.
is no
T += 000
0......9
T += 110
has
8225-COMP-**