Sportplus 9600 Mode D'emploi page 45

6. ASSEMBLY INSTRUCTIONS
STEP 3
1. Fasten the fixed handle (40) to the handle bar tube (32). Secure with
and flat washers (24).
2. Loosen the 4 screws (45) on the back of the computer (46).
3. Connect the upper computer cable
on the back of the computer (46).
4. Place the computer (46) on the computer support on the handlebar tube. Secure the
computer with the 4 screws (45) removed earlier.
46
45
41
32
(41) and
48
40
24
the pulse sensor cable (48) to the connections
45
4
1
2 sets of hex screws (4)