Weight Adjustment; Height Adjustment; Fore/Aft Isolator - Grammer MAXIMO Comfort Mode D'emploi

* if fitted ** depending on model

Weight adjustment

The seat must be adjusted for the driver's
weight with the driver sitting on the seat. The
adjustment is made by pulling out or pushing
in the actuator lever (1) until the green
marking is visible in the weight-and-height
indicator (2).
To prevent damage to the health, the

setting for the driver's weight must be
checked and adjusted as necessary before
the vehicle is driven.

Height adjustment

The seat height can be altered by pulling or
pushing the adjustment lever fully up or down
(1).
 The green marking in the weight-and-
height indicator (2) must be visible.

In order to avoid damage, do not
operate compressor for more than
1 minute.

Fore/aft isolator

Under certain driving conditions (for example
with a trailer attached), it is useful to activate
the fore/aft isolator. This means that shock
impacts in the driving direction can be better
absorbed by the driver seat.
1 = fore/aft isolator off
2 = fore/aft isolator on

After the adjustment of position 1, the
locking lever must latch into the desired
position.
For that, the seat must be pressed backwards
until it latches with an audible click.

It should not be possible to move the
fore/aft isolator into another position when it is
locked.
*** optional extra
21