Seat Functions And Operation; Weight Adjustment; Height Adjustment; Seat Pan Angle Adjustment - Grammer MSG85/721 Mode D'emploi

Seat functions and operation

Weight adjustment

The seat is adjusted for the driver's weight
by turning the weight adjuster lever with
the seat empty. The set weight can be
read from the indicator.
To prevent damage to the health,
the setting for the driver's weight must be
checked and adjusted as necessary before
the vehicle is driven.

Height adjustment

The seat height can be adjusted with
several settings.
Raise the driver seat to the required height
until it audibly latches into place. When the
seat is raised above the highest setting
(endstop) it drops back down to the lowest
position.

Seat pan angle adjustment *

The angle of the seat pan can be
individually adjusted.
To adjust the angle of the seat pan, pull
the left handle upwards. By exerting
pressure on or off the front or rear part of
the seat pan it can be moved to the
desired angle position.
* if fitted
GB
23