Seat Functions And Operation; Weight Adjustment; Height Adjustment; Seat Pan Angle Adjustment - Grammer AVENTO PRO AIR 930 Mode D'emploi

* if fitted ** depending on model

Seat functions and operation

Weight adjustment

The seat must be adjusted for the driver's
weight by briefly pulling the actuator lever of
the automatic weight and height adjuster
(arrow) with the vehicle at a standstill and the
driver sitting on the seat
The driver must sit absolutely still during
adjustment.
Before adjusting the weight, adjust
shock absorbers to the position "soft".

To prevent damage to the health, the
setting for the driver's weight must be
checked and adjusted individually before the
vehicle is driven.

Height adjustment

The seat height can be set pneumatically and
is continuously adjustable.
The seat height can be altered by pulling or
pushing the adjustment lever fully up or down
(arrow). If the adjustment reaches the top or
bottom endstop, the height is adjusted
automatically in order to guarantee a
minimum spring travel.
Before adjusting the height, adjust
shock absorbers to the position "soft".

In order to avoid damage, do not
operate compressor for more than 1 minute

Seat pan angle adjustment *

The angle of the seat pan can be individually
adjusted.
To adjust the angle of the seat pan, pull the
left handle upwards. By exerting pressure on
or off the front or rear part of the seat pan it
can be moved to the desired position.
*** optional extra
.
25