Seat Functions And Operation; Weight Adjustment* (Not For Msg 10); Fore/Aft Adjustment - Grammer MSG 10 Mode D'emploi

Seat functions and operation

* if fitted
20
Weight adjustment *
(not for MSG 10)
The seat is adjusted for the driver's weight
with the seat empty. The adjustment is made
by pressing the actuator lever (arrow) down,
from the upper to the lower position.
The driver weight setting is shown by the po-
sition of the lever on the scale.
Pressing the actuator lever beyond the fur-
thest notch until it stops will return the setting
to 50 kg.
To prevent damage to the health, the
setting for the driver's weight must be
checked and adjusted as necessary before
the vehicle is driven.
Weight adjustment *
(not for MSG 10)
The seat is adjusted for the driver's weight
with the seat empty. The adjustment is made
by pulling out the actuator lever (arrow).
To read off the current setting, pull the actua-
tor lever out until there is a slight resistance.
Pulling the actuator lever out to the endstop
will return the setting to 50 kg.
To prevent damage to the health, the
setting for the driver's weight must be
checked and adjusted as necessary before
the vehicle is driven.

Fore/aft adjustment

The fore/aft adjustment is released by lifting
the locking lever (arrow).
The locking lever must latch into the
desired position. It should not be possible to
move the driver seat into another position
when it is locked.
MSG 10/12/20
GB