Seat Functions And Operation; Weight And Height Adjustment; Fore/Aft Adjustment - Grammer MSG 75G 721 Mode D'emploi

170 kg
max.
45 kg
min.

Seat functions and operation

Weight and height adjustment

The seat is adjusted for the driver's weight by
pulling or pressing the lever for seat weight
adjustment and with the driver sitting on the
seat.
The driver's weight is adjusted correctly when
the arrow is in the middle clear area of the
indicator window.
Within this viewing area, the individual height
can be adjusted to a minimum spring
movement.
When the minimum/maximum weight
adjustment has been reached, you can hear it
reaching the upper or lower end stop.

To prevent damage to the health and
material, the setting for the driver's weight
must be checked and adjusted individually
before the vehicle is driven.

In order to avoid compressor damage
during weight adjustment, the compressor
must be operated no longer than 1 minute.

Weight adjustment from 45 kg to 170
kg possible. The technical specifications on
the offer drawing are decisive.

Fore/aft adjustment

The fore/aft adjustment is released by lifting
the locking lever.
WARNING! Risk of accident!
Do not operate the lever while
driving.
Warning Risk of crushing!
Only touch the lever at the
indented grip, do not reach back
under the lever.

1333 After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to
move the driver's seat into another position
when it is locked.

Do not lift the locking lever with your leg
or calf.
21