Seat Functions And Operation; Weight Adjustment; Height Adjustment - Grammer MAXIMO Professional Mode D'emploi

* if fitted ** depending on model
GB

Seat functions and operation

Weight adjustment

The seat must be adjusted for the driver's
weight by briefly pulling the actuator lever of the
automatic weight and height adjuster (arrow)
with the vehicle at a standstill and the driver
sitting on the seat
The driver must sit absolutely still during
adjustment.
Before adjusting the weight, adjust shock
*
absorbers to the position "soft".
To prevent damage to the health, the
setting for the driver's weight must be checked
and adjusted individually before the vehicle is
driven.

Height adjustment

The seat height can be set pneumatically and is
continuously adjustable.
The seat height can be altered by pulling or
pushing the adjustment lever fully up or down
(arrow). If the adjustment reaches the top or
bottom endstop, the height is adjusted
automatically in order to guarantee a minimum
spring travel.
Before adjusting the height, adjust shock
*
absorbers to the position "soft".
In order to avoid damage, do not operate
compressor for more than 1 minute.
*** optional extra
.
23