Seat Functions And Operation; Weight And Height Adjustment - Grammer MSG87/722 Mode D'emploi

Seat functions and operation

A
+
+
-
-
+
-
+
-
* if fitted ** depending on model
24
B
C
D

Weight and height adjustment

With socket wrench (A) * **:
The seat has to be adjusted for the driver's
weight and height by tilting the handle (+) up
or down (-) with the driver not sitting on the
seat.
The rotational direction is reversed by toggling
the ratchet with the switch (C).
The driver's weight and the seat height are
adjusted correctly when the green marking is
completely visible in the indicator window for
weight and height (B).
The height can be adjusted individually as
long as the green marking is visible.
With spanner (D)* **:
The seat has to be adjusted for the driver's
weight and height by turning the handle
clockwise (+) or counterclockwise (-) with the
driver not sitting on the seat.
The driver's weight and the seat height are
adjusted correctly when the green marking is
completely visible in the indicator window for
weight and height (B).
The height can be adjusted individually as
long as the green marking is visible.
To prevent damage to the health and
material, the setting for the driver's weight
must be checked and adjusted individually
before the vehicle is driven.
WARNING:
For seat models without weight and height
indication (B), the driver's weight and height is
adjusted correctly when the vehicle pedals are
within easy reach and the upper or lower
height limit stop is not permanently hit.
GB