Automatic Charging; Manual Charging; How To Charge The Battery - LG VR6260 Série Guide D'utilisation

Automatic charging

The Robot Cleaner returns to the home station at the end of a cleaning cycle or
when its battery is running low.
※ If 10 minutes elapse without the Robot Cleaner moving or the battery is too low,
the power will automatically be turned OFF.
※ Do NOT turn OFF the Main Power Switch as the battery will not be recharged.
If the machine is returned manually with the Main Power Switch OFF, it shows
an error message, "Main power switch on the back of the HOM-BOT is turned
off. Please turn the switch on."
※ In the event that the unit returns to the Home Station due to a low battery
during the cleaning, cleaning will be started, after the charging, from the nearest
place of the area which has not been cleaned before. (Page 18)
※ If Robot Cleaner is unable to dock to the home station on its fi rst attempt, it will try again until it docks successfully.
※ When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when the battery level is
not low.

Manual charging

If using the Robot Cleaner for the fi rst time or when charging the battery during cleaning, you can manually charge the battery.
※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually charged by pressing the
Home button, it may take slightly longer to fi nd the home station.
※ If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power supply is turned on, it will
automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
• If foreign material is caught in the charging terminal, charging may not proceed smoothly. Wipe the terminal from
time to time with a dry cloth after the power plug is disconnected.(p32)
• To prevent electric shock or damage to the home station, do not touch the charging terminal with any metallic
objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the home station or power plug near a heating source.

HOW TO CHARGE THE BATTERY

Method 1. Attach the Robot Cleaner to the home station by
aligning to the front side of the home station. A melody
sound will be generated along with an audio message to
start charging.
※ If a voice message, "Main power switch on the back
of the HOM-BOT is turned off. Please turn the switch
on." is announced repeatedly, then turn on the Main
Power Switch.
Method 2. When the 'HOME' button of the remote control or the
Robot Cleaner is pressed, charging will be prompted
by automatically generating a searching signal and
returning the Robot Cleaner to the home station.
17