Cleaning The Brush - LG VR6260 Série Guide D'utilisation

The rotating Brush, located on the bottom of Robot Cleaner, helps collect the dust. Clean the Brush as per the following sequence.
※ Before turning over the main unit, lay a soft cloth on the fl oor and remove the Dust Bin.
Otherwise, the main unit can get scratches and dust will fall from Dust Bin.
Turn the Main Power Switch OFF
before starting the clean.
Put the Robot Cleaner upside down
on a soft cloth.
Push the Brush all the way into
the yellow protrusion.
Fit the Fixing Hook (rectangular
shape) on the side of the Brush into
the slots, with the colors matching.

CLEANING THE BRUSH

After checking for foreign materials,
press down the Fixing Hook and pull it
up to separate the brush Cover.
While pushing the Brush, lift the
white protrusion part up to separate
it from the main unit.
While pushing the Brush to the
arrow direction, fi t the Fixing Hook
(rectangular shape) on the opposite
side into the slot.
By using a cleaning tool, clear
hairs and other debris and foreign
materials on the Brush and from the
2 smaller jockey wheels.
Carefully clean the Brush with a
vacuum cleaner or scissors.
Press down and close the Cover until
a 'crack' sound is heard from both
sides of Fixing Hook.
※ Be careful not to trap the side
brush bristles under the cover
when closing it.
31