Mop Cleaning (Option) - LG VR6260 Série Guide D'utilisation

By attaching the ultra microfi ber mop, you can effectively use
the Robot Cleaner to remove dust.
When the mop plate is attached, the Robot Cleaner will not
climb on to carpets or over thresholds, in order to prevent
transferring dirt from the mop.
For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions:
1. Attach the ultra microfi ber mop to the Velcro of the
mop plate as shown in the fi gure.
2. Firmly push the Mop Plate into the furrows until you
hear a 'click' sound.
※ Note that, if the Mop Plate is not secured correctly, it
may separate during the cleaning.
3. It is essential that the fi xing hooks on the Mop Plate
align correctly on to the fi xing grooves on the underside
of the cleaner.
Tip
• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.
• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with liquids such as
coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the carpet while the mop
plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture, it can interfere with the navigation.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.

MOP CLEANING (OPTION)

Do not cover the bottom camera
sensor by mop.
Fixing hook
Caution
"Click!" "Click!"
Fixing groove
25