How To Turn The Robot Cleaner Power Supply On & Off - LG VR6260 Série Guide D'utilisation

HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF
Turning on the main power supply
Make sure the Power Switch on the rear-left of the Robot Cleaner.
If the power is OFF, turn the switch ON.
※ When turning on the power switch, do not press the button located at the
upper section of the Robot Cleaner. Operation of the button can be delayed.
※ Turn off the power switch if the Robot Cleaner will not be used for a long
period of time, in order to protect the battery. The Robotic Cleaner cannot
charge if the main switch is in the "OFF" position.
Turning on from Stand By power.
With the power of Robot Cleaner OFF, press 'Start/Stop' button for 1 second
until a "Ting" sound is heard. In about 10 seconds, the power will be on and a
melody will sound.
※ If 10 minutes elapse without the Robot Cleaner having being given an active
command after being turned on, the power will automatically turn OFF.
Turning off the power supply
Press the START/STOP button for two seconds while the
Robot Cleaner is turned on. A melody will sound when the power is turned off.
Tip
• If the power cannot be turned on, do the following.
- Turn on the power switch and wait for more than 3 seconds.
- Press the 'START/STOP' button when the power switch is turned on.
- If the power is not turned on or if there is no display but only the "Ting" sound, put the Robot Cleaner
manually on to the home station.
15