LG VR6260 Série Guide D'utilisation page 6

SAFETY PRECAUTIONS
CAUTION
Frequently empty the dust bin and
maintain its cleanliness.
The dust collected in the dust bin can
trigger allergies and may contain harmful
insects.
Use the Robot Cleaner indoors only.
Using it outdoors can cause product failure
and irreparable damage to the unit.
Close the cover of the dust bin on the
main unit before starting cleaning.
If the cover is not closed, it can cause injury
or product damage.
DO NOT use the Robot Cleaner around a
banister, staircase or any other dangerous
place.
Otherwise, the user or the product can be
exposed to damage.
In rare cases, the Robot Cleaner's brush
can damage the carpet. If this happens,
immediately stop the cleaning operation.
When a carpet has long tassels, the tassels
can be damaged.
Do not let the main unit and charging
terminal of the home station come into
contact with metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc. into the
Robot Cleaner.
Doing so can cause product failure. Do not
put any water or detergent on the Robot
Cleaner. If liquids get inside of the Robot
Cleaner, turn off the power supply and
contact an LG Electronics sales agent or
customer care center.
4
Do not drop the Robot Cleaner or subject
it to strong impacts.
Doing so can cause injury or product failure
not covered by the warranty.
Do not expose the Robot Cleaner to cold
temperatures (less than -5 °C) for a long
period of time.
Doing so can cause product failure.
Remove any cables or string from the fl oor
before starting.
Cable or string can get tangled in the
wheels of Robot Cleaner and cause product
failure or the cord of an appliance can be
disconnected.
Make sure the Robot Cleaner is not put on
a table or desk, with the power ON.
It may result in injury of the user or damage
in the product.
Do not allow the Robot Cleaner to sweep
up liquids, blades, thumb tacks, kindling,
etc.
These items can cause product failure.
Do not put sharp objects into the opening
of the Robot Cleaner's ultrasonic sensor.
Doing so can cause product failure.
Do not use the Robot Cleaner when the
dust bin is completely fi lled up.
Doing so can cause product failure.