Cleaning Modes - LG VR6260 Série Guide D'utilisation

Zigzag Cleaning
In 'Zigzag Clean' mode, Robot Cleaner repeats a zigzag
operation to clean every and each spot in the cleaning area.
If you need to quickly clean an area choose 'Zigzag Clean'
mode.
Press 'Mode' button on Remote Controller or main unit to
select 'Zigzag Clean' mode and press 'Start' button.
※ Factory release default setting is 'Zigzag Clean.'
Cell by Cell Cleaning
In 'Cell by Cell' mode, Robot Cleaner cleans the area by dividing
it into rectangular spaces.
For meticulous cleaning, select this mode.
Press 'Mode' button on Remote Controller to select 'Cell by
Cell' mode and press 'Start' button.
The 1st stage:
The maximum outline of 3 m x 3 m of cleaning area will be
cleaned. (The size of the outline may vary in accordance with
the shape of the area to be cleaned.)
The 2nd stage:
The 2nd stage of Cell by Cell cleaning engages a Zigzag mode
automatically.
When the 1st, 2nd stages are completed, the cleaned area
will be cleaned through the repetition of the above cleaning
method as the device is being moved to the next part of
cleaning area.
Tip
• Once set up, the cleaning mode(Zigzag, Cell by Cell) setting will be maintained even after the power supply is
turned off.
• During operation, if a mode change is required, press the Stop/OK button and then select the mode. Cleaning will
then start from the beginning.

CLEANING MODES

19