Time Setting - LG VR6260 Série Guide D'utilisation

You can set the current time on the Robot Cleaner.
Pressing 'Clock' button on Remote Controller, when Robot Cleaner is waiting, will start the current time
setting.
Select by using ' ' buttons on
the Remote Controller.
The function can be heard through
the voice guide.
Tip
• Any scheduled cleaning will be activated based on the time on the Robot Cleaner. You must set the clock before
setting scheduled cleaning.
• If there is no input for 10 seconds, the clock setting is canceled.
Flickering Flickering
Flickering Flickering
Flickering Flickering

TIME SETTING

Set the time units by using '
Remote Controller.
Set the unit of minutes using '
Remote Controller.
Set the AM/PM using ' ' buttons on Remote
Controller.
Pressing 'Clock' or 'Stop/OK' button on Remote
Controller will complete the time setting process.
' buttons on
' buttons on
23